Microdeck.tools 100 % en el navegador

Iluminación de una habitación: lúmenes y lux

New

Calcule los lúmenes totales y el número de bombillas según el lux objetivo, la superficie y los factores de utilización y mantenimiento.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

Lux is lumens per square metre. The lumen method gives total lumens = lux × area ÷ (utilisation factor × maintenance factor). The utilisation factor (how much light reaches the work plane) is often 0.5 to 0.7 and the maintenance factor (dirt and lamp ageing) about 0.8. Divide by the lumens of one bulb to get the count, rounded up.

Instrucciones paso a paso

1

Pick a room type to load a typical target lux, or enter your own.

2

Enter the room size.

3

Adjust the utilisation and maintenance factors if you know them.

4

Enter the lumens of one bulb to get the number of fittings, and the lamp efficacy to estimate the power.

Funciones principales y ventajas

  • Room presets from hallways to workshops
  • Total lumens needed and bulb count rounded up
  • Estimated watts from lamp efficacy
  • Metric or feet input

Ejemplos prácticos y casos límite

Living room

Entrada
200 lux, 20 m², UF 0.6, MF 0.8
Salida
8,333 lm, about 11 bulbs of 800 lm

Límites y notas de precisión

  • • Typical lux levels vary by standard and country; use the figure from your local lighting standard for workplaces.
  • • Colour temperature, glare and fitting layout matter as much as raw lumens.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Iluminación de una habitación: lúmenes y lux se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

How many lux for a home?

Around 100 to 200 lux for living areas, 300 to 500 for kitchens and desks, and 500 or more for detailed work.

Lumens or watts?

Lumens measure light. With LEDs, watts only tell you power use, so choose by lumens.

Why is the utilisation factor below 1?

Some light is absorbed by walls, fittings and the ceiling before it reaches the floor or desk.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.