仕組みと内部処理
Lux is lumens per square metre. The lumen method gives total lumens = lux × area ÷ (utilisation factor × maintenance factor). The utilisation factor (how much light reaches the work plane) is often 0.5 to 0.7 and the maintenance factor (dirt and lamp ageing) about 0.8. Divide by the lumens of one bulb to get the count, rounded up.
使い方ステップ
Pick a room type to load a typical target lux, or enter your own.
Enter the room size.
Adjust the utilisation and maintenance factors if you know them.
Enter the lumens of one bulb to get the number of fittings, and the lamp efficacy to estimate the power.
主な機能と特長
- Room presets from hallways to workshops
- Total lumens needed and bulb count rounded up
- Estimated watts from lamp efficacy
- Metric or feet input
入出力の例・エッジケース
Living room
200 lux, 20 m², UF 0.6, MF 0.8
8,333 lm, about 11 bulbs of 800 lm
仕様上の制限・精度に関するご注意
- • Typical lux levels vary by standard and country; use the figure from your local lighting standard for workplaces.
- • Colour temperature, glare and fitting layout matter as much as raw lumens.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。照明の明るさ(ルーメン・ルクス)計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
How many lux for a home?
Around 100 to 200 lux for living areas, 300 to 500 for kitchens and desks, and 500 or more for detailed work.
Lumens or watts?
Lumens measure light. With LEDs, watts only tell you power use, so choose by lumens.
Why is the utilisation factor below 1?
Some light is absorbed by walls, fittings and the ceiling before it reaches the floor or desk.