Cara Kerja di Balik Layar
Lux is lumens per square metre. The lumen method gives total lumens = lux × area ÷ (utilisation factor × maintenance factor). The utilisation factor (how much light reaches the work plane) is often 0.5 to 0.7 and the maintenance factor (dirt and lamp ageing) about 0.8. Divide by the lumens of one bulb to get the count, rounded up.
Panduan Langkah demi Langkah
Pick a room type to load a typical target lux, or enter your own.
Enter the room size.
Adjust the utilisation and maintenance factors if you know them.
Enter the lumens of one bulb to get the number of fittings, and the lamp efficacy to estimate the power.
Fitur Utama & Performa
- Room presets from hallways to workshops
- Total lumens needed and bulb count rounded up
- Estimated watts from lamp efficacy
- Metric or feet input
Contoh Kasus & Uji Coba
Living room
200 lux, 20 m², UF 0.6, MF 0.8
8,333 lm, about 11 bulbs of 800 lm
Catatan Batasan & Akurasi
- • Typical lux levels vary by standard and country; use the figure from your local lighting standard for workplaces.
- • Colour temperature, glare and fitting layout matter as much as raw lumens.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Pencahayaan Ruangan: Lumen & Lux berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
How many lux for a home?
Around 100 to 200 lux for living areas, 300 to 500 for kitchens and desks, and 500 or more for detailed work.
Lumens or watts?
Lumens measure light. With LEDs, watts only tell you power use, so choose by lumens.
Why is the utilisation factor below 1?
Some light is absorbed by walls, fittings and the ceiling before it reaches the floor or desk.