작동 원리 및 구조
Lux is lumens per square metre. The lumen method gives total lumens = lux × area ÷ (utilisation factor × maintenance factor). The utilisation factor (how much light reaches the work plane) is often 0.5 to 0.7 and the maintenance factor (dirt and lamp ageing) about 0.8. Divide by the lumens of one bulb to get the count, rounded up.
단계별 사용 방법
Pick a room type to load a typical target lux, or enter your own.
Enter the room size.
Adjust the utilisation and maintenance factors if you know them.
Enter the lumens of one bulb to get the number of fittings, and the lamp efficacy to estimate the power.
주요 기능 및 장점
- Room presets from hallways to workshops
- Total lumens needed and bulb count rounded up
- Estimated watts from lamp efficacy
- Metric or feet input
입출력 예시 및 엣지 케이스
Living room
200 lux, 20 m², UF 0.6, MF 0.8
8,333 lm, about 11 bulbs of 800 lm
제한 사항 및 정확도 안내
- • Typical lux levels vary by standard and country; use the figure from your local lighting standard for workplaces.
- • Colour temperature, glare and fitting layout matter as much as raw lumens.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 실내 조명 루멘·럭스 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
How many lux for a home?
Around 100 to 200 lux for living areas, 300 to 500 for kitchens and desks, and 500 or more for detailed work.
Lumens or watts?
Lumens measure light. With LEDs, watts only tell you power use, so choose by lumens.
Why is the utilisation factor below 1?
Some light is absorbed by walls, fittings and the ceiling before it reaches the floor or desk.