底層運作原理
Weight = cross-section area × length × density. The cross-section comes from the shape: width × thickness for a plate, π ÷ 4 × d² for a round bar, side² for a square bar, 0.866 × across-flats² for a hexagon, and outer area minus inner area for tubes. In millimetres and metres the formula is kg = mm² × m × density ÷ 1,000,000.
詳細操作步驟
Choose the shape and the material, or enter a custom density.
Enter the dimensions in millimetres and the length in metres.
Enter the quantity.
Read the weight per piece, per metre and in total, also in pounds.
核心功能與效能優勢
- Plate, round, square, hexagon, round tube and rectangular tube
- Ten metals with typical densities plus custom density
- Weight per metre and total
- Pounds shown too
實作範例與邊界案例
20 mm steel round bar
Ø20 mm, carbon steel, 6 m
2.466 kg/m, 14.80 kg per bar
Aluminium flat
50 × 6 mm, 3 m
2.43 kg per piece
使用限制與精準度說明
- • Theoretical weight from nominal size and typical density. Mill tolerances, rounded corners and alloy variation change real weight by a few percent.
- • Rectangular tubes ignore corner radii, which slightly overstates weight.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。金屬重量計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What density does steel have?
Carbon steel is about 7,850 kg/m³; stainless 304 is about 8,000 kg/m³.
How heavy is a 12 mm steel bar per metre?
About 0.89 kg per metre, from d² ÷ 162 for steel.
Can I use another material?
Choose custom density and type kg/m³, for example 1,000 for water or 2,400 for concrete.