Microdeck.tools 100% di Browser

Kalkulator Berat Logam

New

Hitung berat plat, batang bulat, persegi, segi enam, pipa bulat, dan pipa persegi panjang untuk sepuluh logam.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

Weight = cross-section area × length × density. The cross-section comes from the shape: width × thickness for a plate, π ÷ 4 × d² for a round bar, side² for a square bar, 0.866 × across-flats² for a hexagon, and outer area minus inner area for tubes. In millimetres and metres the formula is kg = mm² × m × density ÷ 1,000,000.

Panduan Langkah demi Langkah

1

Choose the shape and the material, or enter a custom density.

2

Enter the dimensions in millimetres and the length in metres.

3

Enter the quantity.

4

Read the weight per piece, per metre and in total, also in pounds.

Fitur Utama & Performa

  • Plate, round, square, hexagon, round tube and rectangular tube
  • Ten metals with typical densities plus custom density
  • Weight per metre and total
  • Pounds shown too

Contoh Kasus & Uji Coba

20 mm steel round bar

Input
Ø20 mm, carbon steel, 6 m
Output
2.466 kg/m, 14.80 kg per bar

Aluminium flat

Input
50 × 6 mm, 3 m
Output
2.43 kg per piece

Catatan Batasan & Akurasi

  • • Theoretical weight from nominal size and typical density. Mill tolerances, rounded corners and alloy variation change real weight by a few percent.
  • • Rectangular tubes ignore corner radii, which slightly overstates weight.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Berat Logam berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

What density does steel have?

Carbon steel is about 7,850 kg/m³; stainless 304 is about 8,000 kg/m³.

How heavy is a 12 mm steel bar per metre?

About 0.89 kg per metre, from d² ÷ 162 for steel.

Can I use another material?

Choose custom density and type kg/m³, for example 1,000 for water or 2,400 for concrete.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.