작동 원리 및 구조
Weight = cross-section area × length × density. The cross-section comes from the shape: width × thickness for a plate, π ÷ 4 × d² for a round bar, side² for a square bar, 0.866 × across-flats² for a hexagon, and outer area minus inner area for tubes. In millimetres and metres the formula is kg = mm² × m × density ÷ 1,000,000.
단계별 사용 방법
Choose the shape and the material, or enter a custom density.
Enter the dimensions in millimetres and the length in metres.
Enter the quantity.
Read the weight per piece, per metre and in total, also in pounds.
주요 기능 및 장점
- Plate, round, square, hexagon, round tube and rectangular tube
- Ten metals with typical densities plus custom density
- Weight per metre and total
- Pounds shown too
입출력 예시 및 엣지 케이스
20 mm steel round bar
Ø20 mm, carbon steel, 6 m
2.466 kg/m, 14.80 kg per bar
Aluminium flat
50 × 6 mm, 3 m
2.43 kg per piece
제한 사항 및 정확도 안내
- • Theoretical weight from nominal size and typical density. Mill tolerances, rounded corners and alloy variation change real weight by a few percent.
- • Rectangular tubes ignore corner radii, which slightly overstates weight.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 금속 무게 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What density does steel have?
Carbon steel is about 7,850 kg/m³; stainless 304 is about 8,000 kg/m³.
How heavy is a 12 mm steel bar per metre?
About 0.89 kg per metre, from d² ÷ 162 for steel.
Can I use another material?
Choose custom density and type kg/m³, for example 1,000 for water or 2,400 for concrete.