Microdeck.tools 100 % en el navegador

Calculadora de peso de metales

New

Calcule el peso de pletina, redondo, cuadrado, hexágono, tubo redondo y rectangular para diez metales.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

Weight = cross-section area × length × density. The cross-section comes from the shape: width × thickness for a plate, π ÷ 4 × d² for a round bar, side² for a square bar, 0.866 × across-flats² for a hexagon, and outer area minus inner area for tubes. In millimetres and metres the formula is kg = mm² × m × density ÷ 1,000,000.

Instrucciones paso a paso

1

Choose the shape and the material, or enter a custom density.

2

Enter the dimensions in millimetres and the length in metres.

3

Enter the quantity.

4

Read the weight per piece, per metre and in total, also in pounds.

Funciones principales y ventajas

  • Plate, round, square, hexagon, round tube and rectangular tube
  • Ten metals with typical densities plus custom density
  • Weight per metre and total
  • Pounds shown too

Ejemplos prácticos y casos límite

20 mm steel round bar

Entrada
Ø20 mm, carbon steel, 6 m
Salida
2.466 kg/m, 14.80 kg per bar

Aluminium flat

Entrada
50 × 6 mm, 3 m
Salida
2.43 kg per piece

Límites y notas de precisión

  • • Theoretical weight from nominal size and typical density. Mill tolerances, rounded corners and alloy variation change real weight by a few percent.
  • • Rectangular tubes ignore corner radii, which slightly overstates weight.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de peso de metales se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

What density does steel have?

Carbon steel is about 7,850 kg/m³; stainless 304 is about 8,000 kg/m³.

How heavy is a 12 mm steel bar per metre?

About 0.89 kg per metre, from d² ÷ 162 for steel.

Can I use another material?

Choose custom density and type kg/m³, for example 1,000 for water or 2,400 for concrete.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.