仕組みと内部処理
Weight = cross-section area × length × density. The cross-section comes from the shape: width × thickness for a plate, π ÷ 4 × d² for a round bar, side² for a square bar, 0.866 × across-flats² for a hexagon, and outer area minus inner area for tubes. In millimetres and metres the formula is kg = mm² × m × density ÷ 1,000,000.
使い方ステップ
Choose the shape and the material, or enter a custom density.
Enter the dimensions in millimetres and the length in metres.
Enter the quantity.
Read the weight per piece, per metre and in total, also in pounds.
主な機能と特長
- Plate, round, square, hexagon, round tube and rectangular tube
- Ten metals with typical densities plus custom density
- Weight per metre and total
- Pounds shown too
入出力の例・エッジケース
20 mm steel round bar
Ø20 mm, carbon steel, 6 m
2.466 kg/m, 14.80 kg per bar
Aluminium flat
50 × 6 mm, 3 m
2.43 kg per piece
仕様上の制限・精度に関するご注意
- • Theoretical weight from nominal size and typical density. Mill tolerances, rounded corners and alloy variation change real weight by a few percent.
- • Rectangular tubes ignore corner radii, which slightly overstates weight.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。金属重量計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What density does steel have?
Carbon steel is about 7,850 kg/m³; stainless 304 is about 8,000 kg/m³.
How heavy is a 12 mm steel bar per metre?
About 0.89 kg per metre, from d² ÷ 162 for steel.
Can I use another material?
Choose custom density and type kg/m³, for example 1,000 for water or 2,400 for concrete.