底層運作原理
The strip power is its watts per metre times the length, and the current is that power divided by the voltage. The supply is sized with headroom. The voltage drop on the feed wire is twice the current times the run times the wire resistance, shown as a percentage of the supply voltage.
詳細操作步驟
Choose the voltage and enter the watts per metre and length.
Enter the feed wire length and size.
Read the supply size, current and drop.
核心功能與效能優勢
- 5, 12 and 24 V
- Standard supply sizes
- Wire drop percentage
- Power injection advice
運算方法、公式與技術標準
Supply = strip watts × (1 + headroom). Drop = 2 × current × length × 0.0172 ÷ wire mm².
實作範例與邊界案例
5 m of 14.4 W/m at 12 V
2 m of 1.5 mm² wire
100 W supply, 6 A, 2.3% drop
使用限制與精準度說明
- • Mains wiring can be dangerous: have a qualified person do it.
- • Check the wire’s current rating too.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。LED燈條電源供應器容量與壓降計算器 (5V/12V/24V 變壓器) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
Why does the strip dim at the end?
Voltage drops along the strip: feed power at both ends.
Is data uploaded?
No.