Microdeck.tools 100% ブラウザ完結

LEDテープライト電源・電圧降下計算機 (5V・12V・24V対応)

New

5V/12V/24VのLEDテープライト(COB・5050・WS2812Bなど)の1m当たり消費電力、全長、配線ケーブル太さ(スケア/AWG)から、適正電源容量と電圧降下による輝度低下を防ぐ給電ポイントを計算します。

100% ブラウザ完結 サーバー送信なし 即時処理

このツールは作業時間の短縮に役立ちましたか? Microdeckの無料運営と継続開発への応援(任意・$3〜)。

仕組みと内部処理

The strip power is its watts per metre times the length, and the current is that power divided by the voltage. The supply is sized with headroom. The voltage drop on the feed wire is twice the current times the run times the wire resistance, shown as a percentage of the supply voltage.

使い方ステップ

1

Choose the voltage and enter the watts per metre and length.

2

Enter the feed wire length and size.

3

Read the supply size, current and drop.

主な機能と特長

  • 5, 12 and 24 V
  • Standard supply sizes
  • Wire drop percentage
  • Power injection advice

計算ロジック・仕様・技術基準

Supply = strip watts × (1 + headroom). Drop = 2 × current × length × 0.0172 ÷ wire mm².

入出力の例・エッジケース

5 m of 14.4 W/m at 12 V

入力
2 m of 1.5 mm² wire
出力
100 W supply, 6 A, 2.3% drop

仕様上の制限・精度に関するご注意

  • • Mains wiring can be dangerous: have a qualified person do it.
  • • Check the wire’s current rating too.

ブラウザ内ローカル処理とプライバシー保護

一般的なWebツールは文書やメディアを外部サーバーへ送信します。LEDテープライト電源・電圧降下計算機 (5V・12V・24V対応) はお使いのブラウザタブ内のみで完結します:

このタブ内で処理完結

入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。

入力データのログ保存なし

作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。

タブ単位の一時メモリ管理

作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。

よくある質問 (FAQ)

Why does the strip dim at the end?

Voltage drops along the strip: feed power at both ends.

Is data uploaded?

No.

関連するマイクロツール

Microdeckを応援する

完全任意 · $3から · アカウント登録不要

金額を選択 (USD):選択中:$5

最小金額は $3 USD です。

完全任意 · $3から · Gumroadの安全な決済ページが開きます。