Microdeck.tools 100 % en el navegador

Calculadora de Fuentes de Alimentación y Caída de Tensión para Tiras LED

New

Calcula la potencia recomendada del transformador/fuente de alimentación, consumo en amperios y caída de tensión según la potencia por metro, longitud y sección de cable de cobre.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

The strip power is its watts per metre times the length, and the current is that power divided by the voltage. The supply is sized with headroom. The voltage drop on the feed wire is twice the current times the run times the wire resistance, shown as a percentage of the supply voltage.

Instrucciones paso a paso

1

Choose the voltage and enter the watts per metre and length.

2

Enter the feed wire length and size.

3

Read the supply size, current and drop.

Funciones principales y ventajas

  • 5, 12 and 24 V
  • Standard supply sizes
  • Wire drop percentage
  • Power injection advice

Metodología, fórmulas y estándares técnicos

Supply = strip watts × (1 + headroom). Drop = 2 × current × length × 0.0172 ÷ wire mm².

Ejemplos prácticos y casos límite

5 m of 14.4 W/m at 12 V

Entrada
2 m of 1.5 mm² wire
Salida
100 W supply, 6 A, 2.3% drop

Límites y notas de precisión

  • • Mains wiring can be dangerous: have a qualified person do it.
  • • Check the wire’s current rating too.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Fuentes de Alimentación y Caída de Tensión para Tiras LED se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

Why does the strip dim at the end?

Voltage drops along the strip: feed power at both ends.

Is data uploaded?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.