Cara Kerja di Balik Layar
The strip power is its watts per metre times the length, and the current is that power divided by the voltage. The supply is sized with headroom. The voltage drop on the feed wire is twice the current times the run times the wire resistance, shown as a percentage of the supply voltage.
Panduan Langkah demi Langkah
Choose the voltage and enter the watts per metre and length.
Enter the feed wire length and size.
Read the supply size, current and drop.
Fitur Utama & Performa
- 5, 12 and 24 V
- Standard supply sizes
- Wire drop percentage
- Power injection advice
Metodologi, Rumus & Standar Teknis
Supply = strip watts × (1 + headroom). Drop = 2 × current × length × 0.0172 ÷ wire mm².
Contoh Kasus & Uji Coba
5 m of 14.4 W/m at 12 V
2 m of 1.5 mm² wire
100 W supply, 6 A, 2.3% drop
Catatan Batasan & Akurasi
- • Mains wiring can be dangerous: have a qualified person do it.
- • Check the wire’s current rating too.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Power Supply & Penurunan Tegangan Lampu LED Strip berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
Why does the strip dim at the end?
Voltage drops along the strip: feed power at both ends.
Is data uploaded?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Ukuran Kabel (AWG) & Jatuh Tegangan
Pilih ukuran kabel berdasarkan arus dan panjang, atau periksa jatuh tegangan
Kalkulator Hukum Ohm & Daya
Masukkan dua dari tegangan, arus, hambatan, atau daya untuk mendapat dua lainnya
Konfigurator Paket Baterai (Seri & Paralel xSyP)
Hitung voltase, kapasitas Ah, energi Wh, dan arus debit untuk baterai 18650 & LiFePO4