작동 원리 및 구조
The strip power is its watts per metre times the length, and the current is that power divided by the voltage. The supply is sized with headroom. The voltage drop on the feed wire is twice the current times the run times the wire resistance, shown as a percentage of the supply voltage.
단계별 사용 방법
Choose the voltage and enter the watts per metre and length.
Enter the feed wire length and size.
Read the supply size, current and drop.
주요 기능 및 장점
- 5, 12 and 24 V
- Standard supply sizes
- Wire drop percentage
- Power injection advice
계산 방식, 공식 및 기술 표준
Supply = strip watts × (1 + headroom). Drop = 2 × current × length × 0.0172 ÷ wire mm².
입출력 예시 및 엣지 케이스
5 m of 14.4 W/m at 12 V
2 m of 1.5 mm² wire
100 W supply, 6 A, 2.3% drop
제한 사항 및 정확도 안내
- • Mains wiring can be dangerous: have a qualified person do it.
- • Check the wire’s current rating too.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. LED 스트립 조명 SMPS 전원 용량 및 전압 강하 계산기 (5V, 12V, 24V) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Why does the strip dim at the end?
Voltage drops along the strip: feed power at both ends.
Is data uploaded?
No.