底層運作原理
A laser removes a strip of material, the kerf, centred on the drawn line. Outside edges end up smaller by one kerf and holes larger. The tool turns that into the sizes to draw, measures the kerf from a test square, and works out slot and tab widths for a chosen clearance.
詳細操作步驟
Choose the task.
Enter the kerf, or cut a test square and measure it.
Enter the wanted sizes or the material thickness.
Use the compensated sizes in your drawing.
核心功能與效能優勢
- Outside and hole compensation
- Kerf measurement
- Tab and slot fit with clearance
運算方法、公式與技術標準
Draw outside = target + kerf; draw hole = target − kerf; kerf = drawn − measured.
實作範例與邊界案例
20 mm test square cut as 19.85 mm
Measure
Kerf 0.15 mm
使用限制與精準度說明
- • Kerf varies with material, speed, focus and power.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。雷射切割切縫寬度補償 (Kerf) 與卡榫結構計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
How do I measure kerf?
Cut a square of known size and subtract the measured size from the drawn size.
Does it work for CNC routers?
Yes, with the cutter diameter as the kerf.
Is data uploaded?
No.