仕組みと内部処理
A laser removes a strip of material, the kerf, centred on the drawn line. Outside edges end up smaller by one kerf and holes larger. The tool turns that into the sizes to draw, measures the kerf from a test square, and works out slot and tab widths for a chosen clearance.
使い方ステップ
Choose the task.
Enter the kerf, or cut a test square and measure it.
Enter the wanted sizes or the material thickness.
Use the compensated sizes in your drawing.
主な機能と特長
- Outside and hole compensation
- Kerf measurement
- Tab and slot fit with clearance
計算ロジック・仕様・技術基準
Draw outside = target + kerf; draw hole = target − kerf; kerf = drawn − measured.
入出力の例・エッジケース
20 mm test square cut as 19.85 mm
Measure
Kerf 0.15 mm
仕様上の制限・精度に関するご注意
- • Kerf varies with material, speed, focus and power.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。レーザー加工機カーフ幅(Kerf)補正&ほぞ組み設計計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
How do I measure kerf?
Cut a square of known size and subtract the measured size from the drawn size.
Does it work for CNC routers?
Yes, with the cutter diameter as the kerf.
Is data uploaded?
No.