Microdeck.tools 100 % en el navegador

Calculadora de Compensación de Corte Láser (Kerf) y Ensambles

New

Compensa el ancho del haz láser (kerf) en planos vectoriales, mide el corte exacto y calcula uniones macho-hembra ajustadas para madera y acrílico.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

A laser removes a strip of material, the kerf, centred on the drawn line. Outside edges end up smaller by one kerf and holes larger. The tool turns that into the sizes to draw, measures the kerf from a test square, and works out slot and tab widths for a chosen clearance.

Instrucciones paso a paso

1

Choose the task.

2

Enter the kerf, or cut a test square and measure it.

3

Enter the wanted sizes or the material thickness.

4

Use the compensated sizes in your drawing.

Funciones principales y ventajas

  • Outside and hole compensation
  • Kerf measurement
  • Tab and slot fit with clearance

Metodología, fórmulas y estándares técnicos

Draw outside = target + kerf; draw hole = target − kerf; kerf = drawn − measured.

Ejemplos prácticos y casos límite

20 mm test square cut as 19.85 mm

Entrada
Measure
Salida
Kerf 0.15 mm

Límites y notas de precisión

  • • Kerf varies with material, speed, focus and power.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Compensación de Corte Láser (Kerf) y Ensambles se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

How do I measure kerf?

Cut a square of known size and subtract the measured size from the drawn size.

Does it work for CNC routers?

Yes, with the cutter diameter as the kerf.

Is data uploaded?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.