작동 원리 및 구조
A laser removes a strip of material, the kerf, centred on the drawn line. Outside edges end up smaller by one kerf and holes larger. The tool turns that into the sizes to draw, measures the kerf from a test square, and works out slot and tab widths for a chosen clearance.
단계별 사용 방법
Choose the task.
Enter the kerf, or cut a test square and measure it.
Enter the wanted sizes or the material thickness.
Use the compensated sizes in your drawing.
주요 기능 및 장점
- Outside and hole compensation
- Kerf measurement
- Tab and slot fit with clearance
계산 방식, 공식 및 기술 표준
Draw outside = target + kerf; draw hole = target − kerf; kerf = drawn − measured.
입출력 예시 및 엣지 케이스
20 mm test square cut as 19.85 mm
Measure
Kerf 0.15 mm
제한 사항 및 정확도 안내
- • Kerf varies with material, speed, focus and power.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 레이저 커터 커프(Kerf) 보정 및 짜맞춤 조인트 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
How do I measure kerf?
Cut a square of known size and subtract the measured size from the drawn size.
Does it work for CNC routers?
Yes, with the cutter diameter as the kerf.
Is data uploaded?
No.