Microdeck.tools 100% di Browser

Kalkulator Kompensasi Lebar Potong Laser (Kerf) & Sambungan Pasak

New

Hitung kompensasi lebar celah sinar laser (kerf), ukur tebal garis potong aktual, dan tentukan ukuran sambungan tab & slot agar pas rapat tanpa lem.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

A laser removes a strip of material, the kerf, centred on the drawn line. Outside edges end up smaller by one kerf and holes larger. The tool turns that into the sizes to draw, measures the kerf from a test square, and works out slot and tab widths for a chosen clearance.

Panduan Langkah demi Langkah

1

Choose the task.

2

Enter the kerf, or cut a test square and measure it.

3

Enter the wanted sizes or the material thickness.

4

Use the compensated sizes in your drawing.

Fitur Utama & Performa

  • Outside and hole compensation
  • Kerf measurement
  • Tab and slot fit with clearance

Metodologi, Rumus & Standar Teknis

Draw outside = target + kerf; draw hole = target − kerf; kerf = drawn − measured.

Contoh Kasus & Uji Coba

20 mm test square cut as 19.85 mm

Input
Measure
Output
Kerf 0.15 mm

Catatan Batasan & Akurasi

  • • Kerf varies with material, speed, focus and power.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Kompensasi Lebar Potong Laser (Kerf) & Sambungan Pasak berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

How do I measure kerf?

Cut a square of known size and subtract the measured size from the drawn size.

Does it work for CNC routers?

Yes, with the cutter diameter as the kerf.

Is data uploaded?

No.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.