底層運作原理
Tiles needed = floor area ÷ area of one tile, plus waste, rounded up. Boxes = tiles ÷ tiles per box, rounded up, because you cannot buy part of a box. The tool also reports the leftover tiles you will have after the job.
詳細操作步驟
Enter the floor area, or room length and width, and subtract any fixed areas such as a bath.
Enter the tile length and width.
Pick the layout (5 to 20% waste) or a custom waste, and the number of tiles per box.
Optionally add a price per box to get the cost.
核心功能與效能優勢
- Metric or inch units
- Waste presets for straight, diagonal or brick bond, and herringbone layouts
- Rounded up to whole boxes
- Leftover tiles shown
實作範例與邊界案例
20 m² with 60 × 60 cm tiles
10% waste, 4 tiles per box
62 tiles, 16 boxes (64 tiles, 2 left over)
使用限制與精準度說明
- • Grout joints change the effective tile size slightly; enter the tile plus joint if the gaps are wide.
- • Waste depends on room shape and layout; add more for patterns and heavily cut rooms. Buy an extra box for future repairs from the same batch.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。磁磚與地板箱數及損耗計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
How much waste should I allow?
About 5 to 10% for straight layouts, 10 to 15% for diagonal, and up to 20% for herringbone or small awkward rooms.
Why buy tiles from the same batch?
Colours and sizes vary slightly between production runs. Buying everything at once, plus a spare box, avoids visible differences.
Does this work for planks?
Yes. Enter the plank length and width, and the number of planks per box.