仕組みと内部処理
Tiles needed = floor area ÷ area of one tile, plus waste, rounded up. Boxes = tiles ÷ tiles per box, rounded up, because you cannot buy part of a box. The tool also reports the leftover tiles you will have after the job.
使い方ステップ
Enter the floor area, or room length and width, and subtract any fixed areas such as a bath.
Enter the tile length and width.
Pick the layout (5 to 20% waste) or a custom waste, and the number of tiles per box.
Optionally add a price per box to get the cost.
主な機能と特長
- Metric or inch units
- Waste presets for straight, diagonal or brick bond, and herringbone layouts
- Rounded up to whole boxes
- Leftover tiles shown
入出力の例・エッジケース
20 m² with 60 × 60 cm tiles
10% waste, 4 tiles per box
62 tiles, 16 boxes (64 tiles, 2 left over)
仕様上の制限・精度に関するご注意
- • Grout joints change the effective tile size slightly; enter the tile plus joint if the gaps are wide.
- • Waste depends on room shape and layout; add more for patterns and heavily cut rooms. Buy an extra box for future repairs from the same batch.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。タイル・床材の枚数と箱数計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
How much waste should I allow?
About 5 to 10% for straight layouts, 10 to 15% for diagonal, and up to 20% for herringbone or small awkward rooms.
Why buy tiles from the same batch?
Colours and sizes vary slightly between production runs. Buying everything at once, plus a spare box, avoids visible differences.
Does this work for planks?
Yes. Enter the plank length and width, and the number of planks per box.