작동 원리 및 구조
Tiles needed = floor area ÷ area of one tile, plus waste, rounded up. Boxes = tiles ÷ tiles per box, rounded up, because you cannot buy part of a box. The tool also reports the leftover tiles you will have after the job.
단계별 사용 방법
Enter the floor area, or room length and width, and subtract any fixed areas such as a bath.
Enter the tile length and width.
Pick the layout (5 to 20% waste) or a custom waste, and the number of tiles per box.
Optionally add a price per box to get the cost.
주요 기능 및 장점
- Metric or inch units
- Waste presets for straight, diagonal or brick bond, and herringbone layouts
- Rounded up to whole boxes
- Leftover tiles shown
입출력 예시 및 엣지 케이스
20 m² with 60 × 60 cm tiles
10% waste, 4 tiles per box
62 tiles, 16 boxes (64 tiles, 2 left over)
제한 사항 및 정확도 안내
- • Grout joints change the effective tile size slightly; enter the tile plus joint if the gaps are wide.
- • Waste depends on room shape and layout; add more for patterns and heavily cut rooms. Buy an extra box for future repairs from the same batch.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 타일·바닥재 수량과 박스 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
How much waste should I allow?
About 5 to 10% for straight layouts, 10 to 15% for diagonal, and up to 20% for herringbone or small awkward rooms.
Why buy tiles from the same batch?
Colours and sizes vary slightly between production runs. Buying everything at once, plus a spare box, avoids visible differences.
Does this work for planks?
Yes. Enter the plank length and width, and the number of planks per box.