Microdeck.tools 100 % en el navegador

Calculadora de baldosas y suelo: cajas y desperdicio

New

Calcule baldosas, cajas y coste según la superficie, el tamaño, el desperdicio y las piezas por caja.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

Tiles needed = floor area ÷ area of one tile, plus waste, rounded up. Boxes = tiles ÷ tiles per box, rounded up, because you cannot buy part of a box. The tool also reports the leftover tiles you will have after the job.

Instrucciones paso a paso

1

Enter the floor area, or room length and width, and subtract any fixed areas such as a bath.

2

Enter the tile length and width.

3

Pick the layout (5 to 20% waste) or a custom waste, and the number of tiles per box.

4

Optionally add a price per box to get the cost.

Funciones principales y ventajas

  • Metric or inch units
  • Waste presets for straight, diagonal or brick bond, and herringbone layouts
  • Rounded up to whole boxes
  • Leftover tiles shown

Ejemplos prácticos y casos límite

20 m² with 60 × 60 cm tiles

Entrada
10% waste, 4 tiles per box
Salida
62 tiles, 16 boxes (64 tiles, 2 left over)

Límites y notas de precisión

  • • Grout joints change the effective tile size slightly; enter the tile plus joint if the gaps are wide.
  • • Waste depends on room shape and layout; add more for patterns and heavily cut rooms. Buy an extra box for future repairs from the same batch.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de baldosas y suelo: cajas y desperdicio se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

How much waste should I allow?

About 5 to 10% for straight layouts, 10 to 15% for diagonal, and up to 20% for herringbone or small awkward rooms.

Why buy tiles from the same batch?

Colours and sizes vary slightly between production runs. Buying everything at once, plus a spare box, avoids visible differences.

Does this work for planks?

Yes. Enter the plank length and width, and the number of planks per box.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.