底層運作原理
A first-order RC filter passes signals up to the cutoff frequency fc = 1 / (2πRC) and attenuates them at 20 dB per decade beyond. A low-pass has the resistor in series and the capacitor to ground; a high-pass swaps them. Enter two of R, C and fc to get the third, and optionally check the gain and phase at another frequency.
詳細操作步驟
Choose low-pass or high-pass.
Choose what to find.
Enter the known values.
Optionally enter a check frequency.
核心功能與效能優勢
- Low-pass and high-pass
- Solve for fc, R or C
- Gain in dB and phase at a frequency
- Time constant
運算方法、公式與技術標準
fc = 1/(2πRC). Low-pass gain = 1/√(1+(f/fc)²); high-pass gain = (f/fc)/√(1+(f/fc)²).
實作範例與邊界案例
1.6 kΩ and 10 nF
Low-pass
fc ≈ 9.95 kHz
使用限制與精準度說明
- • Source and load impedance change the corner frequency.
- • First order only; use more stages or an active filter for steeper slopes.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。RC 濾波器截止頻率計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What is −3 dB?
The cutoff is where the output power is halved: gain 0.707.
How steep is the slope?
20 dB per decade, 6 dB per octave.
Is my data uploaded?
No.