So funktioniert es unter der Haube
A first-order RC filter passes signals up to the cutoff frequency fc = 1 / (2πRC) and attenuates them at 20 dB per decade beyond. A low-pass has the resistor in series and the capacitor to ground; a high-pass swaps them. Enter two of R, C and fc to get the third, and optionally check the gain and phase at another frequency.
Schritt-für-Schritt-Anleitung
Choose low-pass or high-pass.
Choose what to find.
Enter the known values.
Optionally enter a check frequency.
Wichtige Funktionen & Vorteile
- Low-pass and high-pass
- Solve for fc, R or C
- Gain in dB and phase at a frequency
- Time constant
Methodik, Formeln & technische Standards
fc = 1/(2πRC). Low-pass gain = 1/√(1+(f/fc)²); high-pass gain = (f/fc)/√(1+(f/fc)²).
Praxisbeispiele & Grenzfälle
1.6 kΩ and 10 nF
Low-pass
fc ≈ 9.95 kHz
Hinweise zu Grenzen & Genauigkeit
- • Source and load impedance change the corner frequency.
- • First order only; use more stages or an active filter for steeper slopes.
Lokale Verarbeitung im Browser & Datenschutz
Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. RC-Filter-Grenzfrequenz-Rechner läuft direkt in Ihrem Browser-Tab:
Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.
Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).
Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.
Häufig gestellte Fragen (FAQ)
What is −3 dB?
The cutoff is where the output power is halved: gain 0.707.
How steep is the slope?
20 dB per decade, 6 dB per octave.
Is my data uploaded?
No.