仕組みと内部処理
A first-order RC filter passes signals up to the cutoff frequency fc = 1 / (2πRC) and attenuates them at 20 dB per decade beyond. A low-pass has the resistor in series and the capacitor to ground; a high-pass swaps them. Enter two of R, C and fc to get the third, and optionally check the gain and phase at another frequency.
使い方ステップ
Choose low-pass or high-pass.
Choose what to find.
Enter the known values.
Optionally enter a check frequency.
主な機能と特長
- Low-pass and high-pass
- Solve for fc, R or C
- Gain in dB and phase at a frequency
- Time constant
計算ロジック・仕様・技術基準
fc = 1/(2πRC). Low-pass gain = 1/√(1+(f/fc)²); high-pass gain = (f/fc)/√(1+(f/fc)²).
入出力の例・エッジケース
1.6 kΩ and 10 nF
Low-pass
fc ≈ 9.95 kHz
仕様上の制限・精度に関するご注意
- • Source and load impedance change the corner frequency.
- • First order only; use more stages or an active filter for steeper slopes.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。RCフィルター遮断周波数計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What is −3 dB?
The cutoff is where the output power is halved: gain 0.707.
How steep is the slope?
20 dB per decade, 6 dB per octave.
Is my data uploaded?
No.