작동 원리 및 구조
A first-order RC filter passes signals up to the cutoff frequency fc = 1 / (2πRC) and attenuates them at 20 dB per decade beyond. A low-pass has the resistor in series and the capacitor to ground; a high-pass swaps them. Enter two of R, C and fc to get the third, and optionally check the gain and phase at another frequency.
단계별 사용 방법
Choose low-pass or high-pass.
Choose what to find.
Enter the known values.
Optionally enter a check frequency.
주요 기능 및 장점
- Low-pass and high-pass
- Solve for fc, R or C
- Gain in dB and phase at a frequency
- Time constant
계산 방식, 공식 및 기술 표준
fc = 1/(2πRC). Low-pass gain = 1/√(1+(f/fc)²); high-pass gain = (f/fc)/√(1+(f/fc)²).
입출력 예시 및 엣지 케이스
1.6 kΩ and 10 nF
Low-pass
fc ≈ 9.95 kHz
제한 사항 및 정확도 안내
- • Source and load impedance change the corner frequency.
- • First order only; use more stages or an active filter for steeper slopes.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. RC 필터 차단 주파수 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What is −3 dB?
The cutoff is where the output power is halved: gain 0.707.
How steep is the slope?
20 dB per decade, 6 dB per octave.
Is my data uploaded?
No.