Microdeck.tools 100% 瀏覽器本地執行

孔板流量計計算器 (差壓式流量測定)

New

輸入管道內徑、孔板孔徑、流體密度及實測差壓,自動計算直徑比 β 及管道體積流量與質量流量。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

A narrow orifice speeds the fluid up and drops the pressure. The flow follows Q = Cd × A × √(2ΔP/ρ) divided by √(1 − β⁴), where β is the orifice-to-pipe diameter ratio. Enter the two diameters, the fluid density and the pressure drop to get the flow, or enter a flow to get the pressure drop.

詳細操作步驟

1

Choose flow from pressure or pressure from flow.

2

Enter the pipe and orifice diameters.

3

Enter the fluid density and the discharge coefficient.

4

Read the flow in several units, or the pressure drop.

核心功能與效能優勢

  • Both directions
  • m³/h, L/min, L/s and kg/s
  • Orifice velocity and β ratio
  • Warning outside the usual β range

運算方法、公式與技術標準

Q = Cd × A × √(2ΔP/ρ) ÷ √(1 − β⁴).

實作範例與邊界案例

25 mm orifice in a 50 mm pipe

輸入
20 kPa, water
輸出
About 7.0 m³/h

使用限制與精準度說明

  • • Incompressible, single-phase flow at high Reynolds numbers.
  • • Gas flow at large pressure drops needs an expansion factor.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。孔板流量計計算器 (差壓式流量測定) 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

What discharge coefficient should I use?

About 0.61 for a sharp-edged plate; check ISO 5167 for precision work.

Does it include permanent pressure loss?

No, it uses the measured differential pressure.

Is data uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。