Microdeck.tools 100% di Browser

Kalkulator Laju Alir Orifice Plate

New

Hitung laju alir fluida berdasarkan tekanan diferensial ΔP, diameter pipa, dan diameter lubang orifice plate.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

A narrow orifice speeds the fluid up and drops the pressure. The flow follows Q = Cd × A × √(2ΔP/ρ) divided by √(1 − β⁴), where β is the orifice-to-pipe diameter ratio. Enter the two diameters, the fluid density and the pressure drop to get the flow, or enter a flow to get the pressure drop.

Panduan Langkah demi Langkah

1

Choose flow from pressure or pressure from flow.

2

Enter the pipe and orifice diameters.

3

Enter the fluid density and the discharge coefficient.

4

Read the flow in several units, or the pressure drop.

Fitur Utama & Performa

  • Both directions
  • m³/h, L/min, L/s and kg/s
  • Orifice velocity and β ratio
  • Warning outside the usual β range

Metodologi, Rumus & Standar Teknis

Q = Cd × A × √(2ΔP/ρ) ÷ √(1 − β⁴).

Contoh Kasus & Uji Coba

25 mm orifice in a 50 mm pipe

Input
20 kPa, water
Output
About 7.0 m³/h

Catatan Batasan & Akurasi

  • • Incompressible, single-phase flow at high Reynolds numbers.
  • • Gas flow at large pressure drops needs an expansion factor.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Laju Alir Orifice Plate berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

What discharge coefficient should I use?

About 0.61 for a sharp-edged plate; check ISO 5167 for precision work.

Does it include permanent pressure loss?

No, it uses the measured differential pressure.

Is data uploaded?

No.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.