Microdeck.tools 100% ブラウザ完結

オリフィス流量計算機 (差圧流量計)

New

配管内径、オリフィス開口径、流体密度および差圧から体積流量・質量流量および絞り径比βを計算します。

100% ブラウザ完結 サーバー送信なし 即時処理

このツールは作業時間の短縮に役立ちましたか? Microdeckの無料運営と継続開発への応援(任意・$3〜)。

仕組みと内部処理

A narrow orifice speeds the fluid up and drops the pressure. The flow follows Q = Cd × A × √(2ΔP/ρ) divided by √(1 − β⁴), where β is the orifice-to-pipe diameter ratio. Enter the two diameters, the fluid density and the pressure drop to get the flow, or enter a flow to get the pressure drop.

使い方ステップ

1

Choose flow from pressure or pressure from flow.

2

Enter the pipe and orifice diameters.

3

Enter the fluid density and the discharge coefficient.

4

Read the flow in several units, or the pressure drop.

主な機能と特長

  • Both directions
  • m³/h, L/min, L/s and kg/s
  • Orifice velocity and β ratio
  • Warning outside the usual β range

計算ロジック・仕様・技術基準

Q = Cd × A × √(2ΔP/ρ) ÷ √(1 − β⁴).

入出力の例・エッジケース

25 mm orifice in a 50 mm pipe

入力
20 kPa, water
出力
About 7.0 m³/h

仕様上の制限・精度に関するご注意

  • • Incompressible, single-phase flow at high Reynolds numbers.
  • • Gas flow at large pressure drops needs an expansion factor.

ブラウザ内ローカル処理とプライバシー保護

一般的なWebツールは文書やメディアを外部サーバーへ送信します。オリフィス流量計算機 (差圧流量計) はお使いのブラウザタブ内のみで完結します:

このタブ内で処理完結

入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。

入力データのログ保存なし

作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。

タブ単位の一時メモリ管理

作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。

よくある質問 (FAQ)

What discharge coefficient should I use?

About 0.61 for a sharp-edged plate; check ISO 5167 for precision work.

Does it include permanent pressure loss?

No, it uses the measured differential pressure.

Is data uploaded?

No.

関連するマイクロツール

Microdeckを応援する

完全任意 · $3から · アカウント登録不要

金額を選択 (USD):選択中:$5

最小金額は $3 USD です。

完全任意 · $3から · Gumroadの安全な決済ページが開きます。