底層運作原理
Speed is motor rpm times the screw lead. Thrust is 2π times the efficiency times the torque divided by the lead. Pick the screw type for a typical efficiency, then solve for the thrust a motor gives or the torque a load needs.
詳細操作步驟
Enter lead, motor speed and stroke.
Choose the screw type or a custom efficiency.
Choose thrust from torque or torque for a load.
Read the results.
核心功能與效能優勢
- Acme, bronze nut, ball screw and custom efficiency
- Travel time
- Self-locking guidance
運算方法、公式與技術標準
v = rpm × lead; F = 2π·η·T ÷ lead.
實作範例與邊界案例
T8 screw, 0.8 N·m
8 mm lead
About 220 N
使用限制與精準度說明
- • Ignores guide friction, acceleration and critical screw speed.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。電動線性推桿速度與推力計算器 (滾珠/導螺桿) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
Will it hold a load unpowered?
Usually when efficiency is below 50%, but add a brake for safety.
What margin?
25–50% over the calculated torque.
Is data uploaded?
No.