Cara Kerja di Balik Layar
Speed is motor rpm times the screw lead. Thrust is 2π times the efficiency times the torque divided by the lead. Pick the screw type for a typical efficiency, then solve for the thrust a motor gives or the torque a load needs.
Panduan Langkah demi Langkah
Enter lead, motor speed and stroke.
Choose the screw type or a custom efficiency.
Choose thrust from torque or torque for a load.
Read the results.
Fitur Utama & Performa
- Acme, bronze nut, ball screw and custom efficiency
- Travel time
- Self-locking guidance
Metodologi, Rumus & Standar Teknis
v = rpm × lead; F = 2π·η·T ÷ lead.
Contoh Kasus & Uji Coba
T8 screw, 0.8 N·m
8 mm lead
About 220 N
Catatan Batasan & Akurasi
- • Ignores guide friction, acceleration and critical screw speed.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Kecepatan & Dorongan Linear Actuator berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
Will it hold a load unpowered?
Usually when efficiency is below 50%, but add a brake for safety.
What margin?
25–50% over the calculated torque.
Is data uploaded?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Rasio Roda Gigi & Kecepatan RPM
Rasio reduksi total, kecepatan putaran output (RPM), dan torsi gear train bertingkat
Kalkulator Steps per mm Motor Stepper
Hitung nilai steps/mm untuk timing belt GT2 dan leadscrew mesin 3D printer & CNC
Kalkulator Torsi Pengencangan & Beban Awal Baut (Bolt Preload)
Hitung gaya jepit dari torsi kencang atau torsi untuk baut metrik M3 hingga M30