仕組みと内部処理
Speed is motor rpm times the screw lead. Thrust is 2π times the efficiency times the torque divided by the lead. Pick the screw type for a typical efficiency, then solve for the thrust a motor gives or the torque a load needs.
使い方ステップ
Enter lead, motor speed and stroke.
Choose the screw type or a custom efficiency.
Choose thrust from torque or torque for a load.
Read the results.
主な機能と特長
- Acme, bronze nut, ball screw and custom efficiency
- Travel time
- Self-locking guidance
計算ロジック・仕様・技術基準
v = rpm × lead; F = 2π·η·T ÷ lead.
入出力の例・エッジケース
T8 screw, 0.8 N·m
8 mm lead
About 220 N
仕様上の制限・精度に関するご注意
- • Ignores guide friction, acceleration and critical screw speed.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。リニアアクチュエータ速度・推力計算機 (送りねじ/ボールねじ) はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Will it hold a load unpowered?
Usually when efficiency is below 50%, but add a brake for safety.
What margin?
25–50% over the calculated torque.
Is data uploaded?
No.