작동 원리 및 구조
Speed is motor rpm times the screw lead. Thrust is 2π times the efficiency times the torque divided by the lead. Pick the screw type for a typical efficiency, then solve for the thrust a motor gives or the torque a load needs.
단계별 사용 방법
Enter lead, motor speed and stroke.
Choose the screw type or a custom efficiency.
Choose thrust from torque or torque for a load.
Read the results.
주요 기능 및 장점
- Acme, bronze nut, ball screw and custom efficiency
- Travel time
- Self-locking guidance
계산 방식, 공식 및 기술 표준
v = rpm × lead; F = 2π·η·T ÷ lead.
입출력 예시 및 엣지 케이스
T8 screw, 0.8 N·m
8 mm lead
About 220 N
제한 사항 및 정확도 안내
- • Ignores guide friction, acceleration and critical screw speed.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 리니어 액추에이터 이송 속도 및 추력 계산기 (볼스크류/리드스크류) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Will it hold a load unpowered?
Usually when efficiency is below 50%, but add a brake for safety.
What margin?
25–50% over the calculated torque.
Is data uploaded?
No.