Microdeck.tools 100% 瀏覽器本地執行

3D列印線材重量與長度換算器 (PLA/ABS/PETG)

New

支援1.75mm與2.85mm規格的PLA、PETG、ABS、TPU等耗材,精確換算剩餘線材克數與米數。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

Length equals mass divided by the density and the cross-section area of the filament. The tool uses typical densities for common materials and the diameter you pick, and can also give the cost per metre and per gram from the spool price.

詳細操作步驟

1

Pick the conversion direction.

2

Choose the material and diameter.

3

Enter the weight or length and an optional spool price.

4

Read the length, weight and cost.

核心功能與效能優勢

  • Eight materials plus custom density
  • 1.75, 2.85 and custom diameters
  • Metres and feet
  • Cost per metre and gram

運算方法、公式與技術標準

Length = mass ÷ (density × π × (d/2)²).

實作範例與邊界案例

1 kg PLA at 1.75 mm

輸入
Weight → length
輸出
About 335 m

使用限制與精準度說明

  • • Densities vary by brand and additives; weigh a known length for precision.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。3D列印線材重量與長度換算器 (PLA/ABS/PETG) 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

How long is a 1 kg spool?

Roughly 330 m for 1.75 mm PLA and 125 m for 2.85 mm PLA.

Does the spool weight count?

Subtract it; the tool counts filament only.

Is data uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。