작동 원리 및 구조
Length equals mass divided by the density and the cross-section area of the filament. The tool uses typical densities for common materials and the diameter you pick, and can also give the cost per metre and per gram from the spool price.
단계별 사용 방법
Pick the conversion direction.
Choose the material and diameter.
Enter the weight or length and an optional spool price.
Read the length, weight and cost.
주요 기능 및 장점
- Eight materials plus custom density
- 1.75, 2.85 and custom diameters
- Metres and feet
- Cost per metre and gram
계산 방식, 공식 및 기술 표준
Length = mass ÷ (density × π × (d/2)²).
입출력 예시 및 엣지 케이스
1 kg PLA at 1.75 mm
Weight → length
About 335 m
제한 사항 및 정확도 안내
- • Densities vary by brand and additives; weigh a known length for precision.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 3D 프린터 필라멘트 무게-길이 변환 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
How long is a 1 kg spool?
Roughly 330 m for 1.75 mm PLA and 125 m for 2.85 mm PLA.
Does the spool weight count?
Subtract it; the tool counts filament only.
Is data uploaded?
No.