仕組みと内部処理
Length equals mass divided by the density and the cross-section area of the filament. The tool uses typical densities for common materials and the diameter you pick, and can also give the cost per metre and per gram from the spool price.
使い方ステップ
Pick the conversion direction.
Choose the material and diameter.
Enter the weight or length and an optional spool price.
Read the length, weight and cost.
主な機能と特長
- Eight materials plus custom density
- 1.75, 2.85 and custom diameters
- Metres and feet
- Cost per metre and gram
計算ロジック・仕様・技術基準
Length = mass ÷ (density × π × (d/2)²).
入出力の例・エッジケース
1 kg PLA at 1.75 mm
Weight → length
About 335 m
仕様上の制限・精度に関するご注意
- • Densities vary by brand and additives; weigh a known length for precision.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。3Dプリンター フィラメント重量・長さ変換計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
How long is a 1 kg spool?
Roughly 330 m for 1.75 mm PLA and 125 m for 2.85 mm PLA.
Does the spool weight count?
Subtract it; the tool counts filament only.
Is data uploaded?
No.