Cara Kerja di Balik Layar
Length equals mass divided by the density and the cross-section area of the filament. The tool uses typical densities for common materials and the diameter you pick, and can also give the cost per metre and per gram from the spool price.
Panduan Langkah demi Langkah
Pick the conversion direction.
Choose the material and diameter.
Enter the weight or length and an optional spool price.
Read the length, weight and cost.
Fitur Utama & Performa
- Eight materials plus custom density
- 1.75, 2.85 and custom diameters
- Metres and feet
- Cost per metre and gram
Metodologi, Rumus & Standar Teknis
Length = mass ÷ (density × π × (d/2)²).
Contoh Kasus & Uji Coba
1 kg PLA at 1.75 mm
Weight → length
About 335 m
Catatan Batasan & Akurasi
- • Densities vary by brand and additives; weigh a known length for precision.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Konverter Berat ke Panjang Filamen 3D (PLA/ABS/PETG) berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
How long is a 1 kg spool?
Roughly 330 m for 1.75 mm PLA and 125 m for 2.85 mm PLA.
Does the spool weight count?
Subtract it; the tool counts filament only.
Is data uploaded?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Biaya & Listrik Cetak 3D
Hitung biaya bahan, listrik, keausan mesin, dan harga jual print 3D
Kalkulator Kalibrasi E-Steps 3D Printer
Hitung nilai baru E-steps motor extruder dari panjang filamen hasil uji coba
Kalkulator Extrusion Multiplier / Laju Alir Slicer
Koreksi flow rate dari hasil uji ketebalan dinding cetak atau diameter filamen