Microdeck.tools 100% 瀏覽器本地執行

計量泵校準與流量計算器

New

精確校準蠕動泵與隔膜計量泵,輸入測試體積與打藥時間即可獲得真實流量,並自動計算注入指定藥劑量所需時間。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

Run the pump into a measuring cylinder for a known time and enter the volume. The tool gives the real flow in mL/min, L/h and L/day and the correction against the label. Switch to dose mode to calculate how many millilitres of product reach a target ppm in a given volume and how long the pump must run.

詳細操作步驟

1

Collect the pump output for a timed run at the working back-pressure.

2

Enter the volume and the time.

3

Compare the flow with the rated value.

4

Use dose mode to plan product volume and run time.

核心功能與效能優勢

  • Real flow in several units
  • Deviation from rated flow with warning
  • ppm dose to product volume
  • Pump run time

運算方法、公式與技術標準

Flow = volume ÷ time × 60. Product (mL) = system litres × ppm ÷ strength (g/L). Run time = product ÷ flow.

實作範例與邊界案例

48 mL in 60 s

輸入
Calibration
輸出
48 mL/min, 2.88 L/h

使用限制與精準度說明

  • • Flow changes with pressure, viscosity and tubing wear.
  • • Check chemical compatibility and safety data before dosing.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。計量泵校準與流量計算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

How often should I recalibrate?

Whenever you change tubing, product or pressure, and regularly for critical dosing.

What is 1 ppm?

One milligram per litre in water.

Is my data sent anywhere?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。