Microdeck.tools 100 % en el navegador

Calculadora de Calibración de Bomba Dosificadora

New

Calibra bombas peristálticas y dosificadoras de diafragma calculando el caudal real y el tiempo necesario para dosificar.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

Run the pump into a measuring cylinder for a known time and enter the volume. The tool gives the real flow in mL/min, L/h and L/day and the correction against the label. Switch to dose mode to calculate how many millilitres of product reach a target ppm in a given volume and how long the pump must run.

Instrucciones paso a paso

1

Collect the pump output for a timed run at the working back-pressure.

2

Enter the volume and the time.

3

Compare the flow with the rated value.

4

Use dose mode to plan product volume and run time.

Funciones principales y ventajas

  • Real flow in several units
  • Deviation from rated flow with warning
  • ppm dose to product volume
  • Pump run time

Metodología, fórmulas y estándares técnicos

Flow = volume ÷ time × 60. Product (mL) = system litres × ppm ÷ strength (g/L). Run time = product ÷ flow.

Ejemplos prácticos y casos límite

48 mL in 60 s

Entrada
Calibration
Salida
48 mL/min, 2.88 L/h

Límites y notas de precisión

  • • Flow changes with pressure, viscosity and tubing wear.
  • • Check chemical compatibility and safety data before dosing.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Calibración de Bomba Dosificadora se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

How often should I recalibrate?

Whenever you change tubing, product or pressure, and regularly for critical dosing.

What is 1 ppm?

One milligram per litre in water.

Is my data sent anywhere?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.