底層運作原理
Spindle speed is the surface speed for the material divided by the cutter circumference. The feed is the speed times the number of flutes times the chip load per tooth. Pick the material and cutter type for a preset surface speed or enter your own, and the tool caps the speed at your spindle maximum.
詳細操作步驟
Pick the material and cutter type.
Enter diameter, flutes and chip load.
Enter the spindle maximum and optional cut width and depth.
Read rpm, feed and removal rate.
核心功能與效能優勢
- Seven material presets
- HSS and carbide
- Spindle speed cap
- Material removal rate
運算方法、公式與技術標準
RPM = Vc × 1000 ÷ (π × D). Feed = RPM × flutes × chip load.
實作範例與邊界案例
6 mm carbide in aluminium
2 flutes, 0.05 mm
About 13,000 rpm
使用限制與精準度說明
- • Presets are conservative starting points; consult the cutter maker data.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。CNC主軸轉速 (RPM) 與進給率 (Feed Rate) 切削計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What is chip load?
Thickness of material each tooth removes per revolution.
Why is my feed lower?
The spindle limit caps the rpm, so the feed is reduced to keep the chip load.
Is data uploaded?
No.