Microdeck.tools 100% 브라우저 실행

CNC 스핀들 회전수(RPM) 및 이송 속도(Feed Rate) 계산기

New

공구 직경과 날 수, 소재별 절삭 속도 및 칩 로드(날당 이송)를 입력하여 가공 주축 회전수(RPM)와 가공 이송 속도(mm/min), 칩 배출량을 계산합니다.

100% 브라우저 실행 서버 업로드 없음 즉시 결과 확인

이 도구가 시간을 절약하는 데 도움이 되었나요? Microdeck을 무료로 유지하고 개선하는 데 힘을 보태주세요. 자율 참여 · $3부터.

작동 원리 및 구조

Spindle speed is the surface speed for the material divided by the cutter circumference. The feed is the speed times the number of flutes times the chip load per tooth. Pick the material and cutter type for a preset surface speed or enter your own, and the tool caps the speed at your spindle maximum.

단계별 사용 방법

1

Pick the material and cutter type.

2

Enter diameter, flutes and chip load.

3

Enter the spindle maximum and optional cut width and depth.

4

Read rpm, feed and removal rate.

주요 기능 및 장점

  • Seven material presets
  • HSS and carbide
  • Spindle speed cap
  • Material removal rate

계산 방식, 공식 및 기술 표준

RPM = Vc × 1000 ÷ (π × D). Feed = RPM × flutes × chip load.

입출력 예시 및 엣지 케이스

6 mm carbide in aluminium

입력
2 flutes, 0.05 mm
출력
About 13,000 rpm

제한 사항 및 정확도 안내

  • • Presets are conservative starting points; consult the cutter maker data.

브라우저 로컬 처리 및 개인정보 보호

일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. CNC 스핀들 회전수(RPM) 및 이송 속도(Feed Rate) 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:

현재 탭에서 직접 처리

입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.

입력 데이터 로그 미보관

도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.

일시적 탭 메모리 수명주기

작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.

자주 묻는 질문 (FAQ)

What is chip load?

Thickness of material each tooth removes per revolution.

Why is my feed lower?

The spindle limit caps the rpm, so the feed is reduced to keep the chip load.

Is data uploaded?

No.

관련 마이크로 도구 살펴보기

Microdeck 후원하기

100% 자율 후원 · $3부터 · 회원가입 불필요

금액 선택 (USD):선택 금액:$5

최소 후원 금액은 $3 USD입니다.

100% 자율 · $3부터 · Gumroad 안전 결제 창이 열립니다.