Microdeck.tools 100 % en el navegador

Calculadora CNC de Velocidad de Husillo y Avance

New

Calcula RPM del cabezal y velocidad de avance a partir del diámetro de fresa, número de labios, velocidad de corte y carga por diente.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

Spindle speed is the surface speed for the material divided by the cutter circumference. The feed is the speed times the number of flutes times the chip load per tooth. Pick the material and cutter type for a preset surface speed or enter your own, and the tool caps the speed at your spindle maximum.

Instrucciones paso a paso

1

Pick the material and cutter type.

2

Enter diameter, flutes and chip load.

3

Enter the spindle maximum and optional cut width and depth.

4

Read rpm, feed and removal rate.

Funciones principales y ventajas

  • Seven material presets
  • HSS and carbide
  • Spindle speed cap
  • Material removal rate

Metodología, fórmulas y estándares técnicos

RPM = Vc × 1000 ÷ (π × D). Feed = RPM × flutes × chip load.

Ejemplos prácticos y casos límite

6 mm carbide in aluminium

Entrada
2 flutes, 0.05 mm
Salida
About 13,000 rpm

Límites y notas de precisión

  • • Presets are conservative starting points; consult the cutter maker data.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora CNC de Velocidad de Husillo y Avance se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

What is chip load?

Thickness of material each tooth removes per revolution.

Why is my feed lower?

The spindle limit caps the rpm, so the feed is reduced to keep the chip load.

Is data uploaded?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.