仕組みと内部処理
Spindle speed is the surface speed for the material divided by the cutter circumference. The feed is the speed times the number of flutes times the chip load per tooth. Pick the material and cutter type for a preset surface speed or enter your own, and the tool caps the speed at your spindle maximum.
使い方ステップ
Pick the material and cutter type.
Enter diameter, flutes and chip load.
Enter the spindle maximum and optional cut width and depth.
Read rpm, feed and removal rate.
主な機能と特長
- Seven material presets
- HSS and carbide
- Spindle speed cap
- Material removal rate
計算ロジック・仕様・技術基準
RPM = Vc × 1000 ÷ (π × D). Feed = RPM × flutes × chip load.
入出力の例・エッジケース
6 mm carbide in aluminium
2 flutes, 0.05 mm
About 13,000 rpm
仕様上の制限・精度に関するご注意
- • Presets are conservative starting points; consult the cutter maker data.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。CNC主軸回転数(RPM)&送り速度(Feed Rate)計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What is chip load?
Thickness of material each tooth removes per revolution.
Why is my feed lower?
The spindle limit caps the rpm, so the feed is reduced to keep the chip load.
Is data uploaded?
No.