底層運作原理
For an open belt, the length is about twice the centre distance plus the half-circumference terms and a correction for the diameter difference. The tool solves it in both directions, and also gives the driven speed, the belt speed and the wrap angle on the smaller pulley.
詳細操作步驟
Choose belt length or centre distance.
Enter the two pulley diameters.
Enter the centre distance or belt length.
Optionally add the driver speed.
核心功能與效能優勢
- Both directions
- Driven rpm and belt speed
- Wrap angle warning below 120°
運算方法、公式與技術標準
L ≈ 2C + π(D + d)/2 + (D − d)²/4C; C = (B + √(B² − 32(D − d)²)) ÷ 16 with B = 4L − 2π(D + d).
實作範例與邊界案例
60 and 120 mm, 300 mm apart
Belt length
About 886 mm
使用限制與精準度說明
- • Open belt drives only; use the pitch diameter for toothed belts.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。皮帶輪中心距與皮帶長度計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What wrap angle is needed?
At least 120° for V-belts to avoid slip.
Do I round the belt length?
Yes, pick the nearest standard length and recalculate the centre distance.
Is data uploaded?
No.