Microdeck.tools 100% di Browser

Kalkulator Jarak Sumbu Pulley & Panjang Sabuk (Belt)

New

Hitung panjang sabuk timing belt dari jarak sumbu kedua puli atau hitung jarak poros dari panjang sabuk standar beserta sudut kontak pelukan puli.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

For an open belt, the length is about twice the centre distance plus the half-circumference terms and a correction for the diameter difference. The tool solves it in both directions, and also gives the driven speed, the belt speed and the wrap angle on the smaller pulley.

Panduan Langkah demi Langkah

1

Choose belt length or centre distance.

2

Enter the two pulley diameters.

3

Enter the centre distance or belt length.

4

Optionally add the driver speed.

Fitur Utama & Performa

  • Both directions
  • Driven rpm and belt speed
  • Wrap angle warning below 120°

Metodologi, Rumus & Standar Teknis

L ≈ 2C + π(D + d)/2 + (D − d)²/4C; C = (B + √(B² − 32(D − d)²)) ÷ 16 with B = 4L − 2π(D + d).

Contoh Kasus & Uji Coba

60 and 120 mm, 300 mm apart

Input
Belt length
Output
About 886 mm

Catatan Batasan & Akurasi

  • • Open belt drives only; use the pitch diameter for toothed belts.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Jarak Sumbu Pulley & Panjang Sabuk (Belt) berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

What wrap angle is needed?

At least 120° for V-belts to avoid slip.

Do I round the belt length?

Yes, pick the nearest standard length and recalculate the centre distance.

Is data uploaded?

No.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.