Microdeck.tools 100% In-Browser

Belt & Pulley Center Distance Calculator

New

Calculate the belt length from the centre distance and pulley diameters, or the centre distance for a belt length, plus the speed ratio, belt speed and wrap angle.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

For an open belt, the length is about twice the centre distance plus the half-circumference terms and a correction for the diameter difference. The tool solves it in both directions, and also gives the driven speed, the belt speed and the wrap angle on the smaller pulley.

Step-by-Step Instructions

1

Choose belt length or centre distance.

2

Enter the two pulley diameters.

3

Enter the centre distance or belt length.

4

Optionally add the driver speed.

Key Features & Performance

  • Both directions
  • Driven rpm and belt speed
  • Wrap angle warning below 120°

Methodology, Formulas & Technical Standards

L ≈ 2C + π(D + d)/2 + (D − d)²/4C; C = (B + √(B² − 32(D − d)²)) ÷ 16 with B = 4L − 2π(D + d).

Worked Examples & Edge Cases

60 and 120 mm, 300 mm apart

Input
Belt length
Output
About 886 mm

Limitations, Scope & Accuracy Notes

  • • Open belt drives only; use the pitch diameter for toothed belts.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. Belt & Pulley Center Distance Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

What wrap angle is needed?

At least 120° for V-belts to avoid slip.

Do I round the belt length?

Yes, pick the nearest standard length and recalculate the centre distance.

Is data uploaded?

No.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.