仕組みと内部処理
For an open belt, the length is about twice the centre distance plus the half-circumference terms and a correction for the diameter difference. The tool solves it in both directions, and also gives the driven speed, the belt speed and the wrap angle on the smaller pulley.
使い方ステップ
Choose belt length or centre distance.
Enter the two pulley diameters.
Enter the centre distance or belt length.
Optionally add the driver speed.
主な機能と特長
- Both directions
- Driven rpm and belt speed
- Wrap angle warning below 120°
計算ロジック・仕様・技術基準
L ≈ 2C + π(D + d)/2 + (D − d)²/4C; C = (B + √(B² − 32(D − d)²)) ÷ 16 with B = 4L − 2π(D + d).
入出力の例・エッジケース
60 and 120 mm, 300 mm apart
Belt length
About 886 mm
仕様上の制限・精度に関するご注意
- • Open belt drives only; use the pitch diameter for toothed belts.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。プーリー軸間距離・ベルト長さ計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What wrap angle is needed?
At least 120° for V-belts to avoid slip.
Do I round the belt length?
Yes, pick the nearest standard length and recalculate the centre distance.
Is data uploaded?
No.