Microdeck.tools 100% 브라우저 실행

배관 유속 및 마찰 손실 수두 계산기

New

관경, 유량, 배관 길이 및 재질 조도에 따른 유속, 레이놀즈수 및 마찰 손실 수두를 산출하여 펌프 배관 설계를 돕습니다.

100% 브라우저 실행 서버 업로드 없음 즉시 결과 확인

이 도구가 시간을 절약하는 데 도움이 되었나요? Microdeck을 무료로 유지하고 개선하는 데 힘을 보태주세요. 자율 참여 · $3부터.

작동 원리 및 구조

The tool converts the flow to a velocity, finds the Reynolds number from the water temperature and then the Darcy friction factor (64/Re when laminar, the Swamee–Jain equation when turbulent). Head loss is friction in the straight pipe plus the fittings loss, and it is also given as a pressure drop.

단계별 사용 방법

1

Enter flow, inside diameter and pipe length.

2

Choose the pipe material and water temperature.

3

Add the sum of the fitting loss coefficients if known.

4

Read the velocity, head loss and pressure drop.

주요 기능 및 장점

  • Darcy–Weisbach with Swamee–Jain
  • Five pipe roughness values and five water temperatures
  • Fitting loss coefficients
  • Velocity and transition-flow warnings

계산 방식, 공식 및 기술 표준

hf = f × (L/D) × v²/2g + ΣK × v²/2g. Re = vD/ν. Swamee–Jain: f = 0.25 / [log10(ε/3.7D + 5.74/Re^0.9)]².

입출력 예시 및 엣지 케이스

60 L/min in 40 mm PVC, 50 m

입력
Water 20 °C
출력
About 0.8 m/s and about 1 m of head

제한 사항 및 정확도 안내

  • • Water only; other liquids need their own viscosity and density.
  • • Fouling and ageing raise the real loss.

브라우저 로컬 처리 및 개인정보 보호

일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 배관 유속 및 마찰 손실 수두 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:

현재 탭에서 직접 처리

입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.

입력 데이터 로그 미보관

도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.

일시적 탭 메모리 수명주기

작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.

자주 묻는 질문 (FAQ)

What velocity should I design for?

Typically 1–2 m/s for water supply and below 3 m/s in most cases.

What is ΣK?

The sum of fitting loss coefficients, such as 0.9 per 90° elbow.

Is my data uploaded?

No.

관련 마이크로 도구 살펴보기

Microdeck 후원하기

100% 자율 후원 · $3부터 · 회원가입 불필요

금액 선택 (USD):선택 금액:$5

최소 후원 금액은 $3 USD입니다.

100% 자율 · $3부터 · Gumroad 안전 결제 창이 열립니다.