Microdeck.tools 100% di Browser

Kalkulator Kecepatan Aliran & Rugi Gesek Pipa

New

Hitung kecepatan aliran air, bilangan Reynolds, serta penurunan tekanan head loss akibat gesekan dinding pipa.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

The tool converts the flow to a velocity, finds the Reynolds number from the water temperature and then the Darcy friction factor (64/Re when laminar, the Swamee–Jain equation when turbulent). Head loss is friction in the straight pipe plus the fittings loss, and it is also given as a pressure drop.

Panduan Langkah demi Langkah

1

Enter flow, inside diameter and pipe length.

2

Choose the pipe material and water temperature.

3

Add the sum of the fitting loss coefficients if known.

4

Read the velocity, head loss and pressure drop.

Fitur Utama & Performa

  • Darcy–Weisbach with Swamee–Jain
  • Five pipe roughness values and five water temperatures
  • Fitting loss coefficients
  • Velocity and transition-flow warnings

Metodologi, Rumus & Standar Teknis

hf = f × (L/D) × v²/2g + ΣK × v²/2g. Re = vD/ν. Swamee–Jain: f = 0.25 / [log10(ε/3.7D + 5.74/Re^0.9)]².

Contoh Kasus & Uji Coba

60 L/min in 40 mm PVC, 50 m

Input
Water 20 °C
Output
About 0.8 m/s and about 1 m of head

Catatan Batasan & Akurasi

  • • Water only; other liquids need their own viscosity and density.
  • • Fouling and ageing raise the real loss.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Kecepatan Aliran & Rugi Gesek Pipa berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

What velocity should I design for?

Typically 1–2 m/s for water supply and below 3 m/s in most cases.

What is ΣK?

The sum of fitting loss coefficients, such as 0.9 per 90° elbow.

Is my data uploaded?

No.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.